[Product]
ShortName=TEW-638APB
AppTitle=TRENDnet TEW-638APB Setup Utility

AcrobatReader=AcrobatReader\ar500enu.exe
AcrobatReaderTitle=Acrobat Reader Setup
UserGuide=Manual\UG_TEW-638 APB(v2.0).pdf
ProductReg=http://www.trendnet.com/register
License=License.txt
QIG=QIG

Res_Path=Res

[Setting]
SSID=TRENDnet638
NonWorking=0

[TFrameWelcome]
GBoxWelcome=Welcome
LbInfo1=Welcome to the Setup Wizard for your TEW-638APB.

BtnStart=Start
BtnUG=User Guide
BtnExit=Exit

[TFrameLicense]	
GBoxLicense=License Agreement
ChkAccept=I accept the terms in the License Agreement.
BtnNext=Next
BtnBack=Back
BtnExit=Exit

[TFrameTutorial]
BtnNext=Next
BtnBack=Back
BtnExit=Exit

[TFrameDevList]
GBoxDevList=
LbDevListInfo=Search for device on the network
LvDevList_Col0=Name
LvDevList_Col1=MAC Address
PlSearch=Searching...
BtnRefresh=Refresh

BtnExit=Exit
BtnBack=Back
BtnCfg=Configure

[TFramePassword]
GBoxPassword=
LbPassword=Password:
LbInfo1=NOTE: For security purposed we recommend changing the default password after setup is complete.

BtnExit=Exit
BtnBack=Back
BtnLogin=Login

[TFrameSetupMethod]
GBoxSetupMethod=
LbCurrentIP=Current Network Information:
LbIP=IP Address:
LbMask=Subnet Mask:
LbGateway=Gateway:
RBtnSetIPDHCP='Dynamic IP Address' Configuration
LbDHCPInfo=With this setting the 300Mbps Wireless N Access Point will attain an IP address automatically. This setting is recommend for most users.
RBtnSetIP='Static IP Address' Configuration
LbSetIPInfo=With this setting the 300Mbps Wireless N Access Point will maintain a specific IP Address that does not change. An additional step of inputting the specific IP Address is required. This feature is recommended for advanced users only. 
RBtnSetWireless=Wireless Configuration
RBtnSetAdvance=Advanced setting
RBtnWebUI=Go to web UI
LbClickNext=

BtnExit=Exit
BtnBack=Back
BtnNext_DHCP=Configure
BtnNext_STATIC=Next

[TFrameDevIPCfg]
GBoxCfg=
LbCfgInfo=Specify IP Address:
RBtnDHCP=Obtain network settings automatically
RBtnStatic=Specify network settings
LbIP=IP Address:
LbMask=Subnet Mask:
LbGateway=Gateway:
LbDNS1=DNS 1:
LbDNS2=DNS 2:
LbStaticIPInfo=Note: Please refer to your computer's user guide regarding management of 'Static IP Address' information.
LbClickNext=

BtnExit=Exit
BtnBack=Back
BtnNext=Configure

[TFrameWlModeSel]
RBtnAPMode=Access Point
LbAPModeInfo=Select this option to use the TEW-638APB in to an Access Point. This will allow you to add or upgrade you wireless connection to wireless N and share wireless access with others.
RBtnWirelessBridge=AP Client
LbWirelessBridgeInfo=Select option to allow the TEW-638APB to work as a wireless network adapter. Use this mode to add wireless connectivity to you gaming console or Ethernet enable device.
LbNote=Note: Additional AP Modes (Bridge and WDS) can be configured using the Web Browser, please consult the User・s Guide for more information.

BtnExit=Exit
BtnBack=Back
BtnNext=Configure

[TFrameSetWlMethod]
GBoxSetWlMethod=
LbSetWlInfo=Wireless Configuration
RBtnManual=Manual Setup
RBtnWPS=Wi-Fi Protected Setup (WPS)
LbSetWlMsg=WPS automates the setup process between this device and another wireless adapter that supports WPS. Please note that your wireless adapter must support WPS in order for this technology to work. Not all adapters support WPS. Please refer to your wireless adapter's user guide to confirm this feature is support.
LbClickNext=Click Next to continue

BtnExit=Exit
BtnBack=Back
BtnNext=Next

[TFrameWlProfBand]
GBoxWirelessBand=Wireless Network
LbBand=Wireless Band

BtnExit=Exit
BtnBack=Back
BtnNext=Next

[TFrameWlProfSSID]
GBoxSSID=Wireless Network
LbSSID=SSID:

BtnExit=Exit
BtnBack=Back
BtnNext=Next

[TFrameWlProfSecurity]
GBoxSecurity=Wireless Security
LbSecurity=Security Mode:

BtnExit=Exit
BtnBack=Back
BtnNext=Next

[TFrameWlProfWEP]
GBoxWEP=Wireless Security
LbWEP=WEP Key Length:
LbWEPKey=WEP Key:
LbAuthen=Authentication:

BtnExit=Exit
BtnBack=Back
BtnNext=Next

[TFrameWlProfPSK]
GBoxPSK=Wireless Security
LbWPAMode=WPA Mode:
LbPassphrase=Pre-Shared Key:
LbCipher=Cipher Type:

BtnExit=Exit
BtnBack=Back
BtnNext=Next

[TFrameWlProfConfirm]
GBoxConfirm=Confirm New Settings
LbNetworkInfo=Network Settings
LbIP=IP Address:
LbMask=Subnet Mask:
LbGateway=Gateway:
LbWirelessInfo_AP=Wireless Settings
LbWirelessInfo_BRIDGE=Wireless Profile
LbSSID=SSID:
LbSecurity=Security Mode:
LbAuthen=Authentication:
LbWEPMode=WEP Key Length:
LbWPAMode=WPA Mode:
LbCipher=Cipher Type:
LbKey=Key:
LbComfirmMsg=Save or print your configuration settings (recommended)
BtnSave=Save
BtnPrint=Print

BtnExit=Exit
BtnBack=Back
BtnNext_AP=Configure
BtnNext_BRIDGE=Connect

[TFrameWPSMethod]
GBoxWPSMethod=Wi-Fi Protected Setup
RBtnPBC=Push Button Method
LbPBCInfo=This device and an adapter is setup automatically by pushing the WPS buttons on each respective device. The Push Button Method is recommended.
RBtnPIN=PIN Method
LbDevPIN=Wireless Device PIN:
LbPINInfo=This device and an adapter is setup by inputing the PIN number from each respective device.
LbWPSMethodMsg=When using Wi-Fi Protected Setup, select the one of the two options available, refer to your User's Guide for further instructions.

BtnExit=Exit
BtnBack=Back
BtnNext=Connect

[TFrameSuccess]
GBoxSuccess=
LbSuccess1=Congratulations!
LbSuccess2=Your 300Mbps Wireless N Access Point is Now Configured

BtnExit=Exit
BtnBack=Back
BtnNext=Next

[FormProgress]
LbWait=Please wait...

[Message]
MSG_Exit=Do you want to exit the Setup Wizard?
MSG_InstAcrobat=Acrobat Reader is not installed. Would you like to install it now?
ER_FILE_UG=Unable to open the user guide.
ER_FILE_Acrobat=Unable to find Acrobat Reader setup file.

ER_Ethr_Interface=Unable to initialize adapter interface.
ER_Empty_SSID=Please enter SSID.
ER_WEPKey=You have entered an incorrect WEP key. Please try again.
ER_PSKKeyHex=Pre-Shared Key should be 64 hex digits.
ER_PSKKey=Pre-Shared Key should be between 8 to 63 charachers in ASCII format.
ER_LOGIN=Unable to login the device.
ER_CONNECT=Unable to complete the configuration.
ER_PIN_Code=Invaild PIN Code

[TFrameSiteSurvey]
GroupBox1=Site Survey

BtnExit=Exit
BtnBack=Back
BtnManual=Manual
BtnWPS=WPS
BtnNext=Connect

[String]
SecurityNone=None
SecurityWEP=WEP
SecurityWPAPSK=WPA-PSK
SecurityWPA=WPA

AuthenOpen=Open
AuthenShared=Shared Key
AuthenAuto=Auto

WEP64=64 bit
WEP128=128 bit

WPA_WPA=WPA Only
WPA_WPA2=WPA2 Only
WPA_WPAAuto=WPA or WPA2

CipherTKIP=TKIP
CipherAES=AES
CipherAuto=TKIP and AES

SetWlMethod_AP_MODE_MSG=WPS automates the setup process between this device and another wireless adapter that supports WPS. Please note that your wireless adapter must support WPS in order for this technology to work. Not all adapters support WPS. Please refer to your wireless adapter・s user guide to confirm this feature is support.
SetWlMethod_BRIDGE_MODE_MSG=WPS automates the setup process between this device and another Access Point that supports WPS. Please note that the Access Point must support WPS in order for this technology to work. Not all AP support WPS. Please refer to your wireless adapter・s user guide to confirm this feature is support.

WPSMethod_AP_MODE_SSID=Wireless Device SSID:
WPSMethod_AP_MODE_DevPIN=Wireless Device PIN:
WPSMethod_AP_MODE_PBC_MSG=This device and an adapter is setup automatically by pushing the WPS buttons on each respective device. The Push Button Method is recommended.
WPSMethod_AP_MODE_PIN_MSG=This device and an adapter is setup by inputing the PIN number from each respective device.
WPSMethod_AP_MODE_MSG=When using Wi-Fi Protected Setup, select the one of the two options available, refer to your User・s Guide for further instructions.
WPSMethod_BRIDGE_MODE_SSID=AP SSID:
WPSMethod_BRIDGE_MODE_DevPIN=Device PIN:
WPSMethod_BRIDGE_MODE_PBC_MSG=This device and an AP is setup automatically by pushing the WPS buttons on each respective device. The Push Button Method is recommended.
WPSMethod_BRIDGE_MODE_PIN_MSG=Select an AP SSID that you want to connect and enter Device PIN into the AP.
WPSMethod_BRIDGE_MODE_MSG=When using Wi-Fi Protected Setup, select the one of the two options available, refer to your User・s Guide for further instructions.

[FormAutorun_CtrlPos]
BtnSetupWizard=336,92
BtnUG=336,137
BtnUG_UG=336,174
BtnUG_QIG=336,192
BtnProductReg=336,184
BtnExit=336,231

[FormRes_TImage]
ImgBGAutorun=BGAutorun.jpg
ImgBtnSetupWizardN=BtnSetupWizardN.bmp
ImgBtnSetupWizardD=BtnSetupWizardD.bmp
ImgBtnUGN=BtnUGN.bmp
ImgBtnUGD=BtnUGD.bmp
ImgBtnProductRegN=BtnProductRegN.bmp
ImgBtnProductRegD=BtnProductRegD.bmp
ImgBtnExitN=BtnExitN.bmp
ImgBtnExitD=BtnExitD.bmp
ImgBtnUG_QIGD=BtnUG_QIGD.jpg
ImgBtnUG_QIGN=BtnUG_QIGN.jpg
ImgBtnUG_UGD=BtnUG_UGD.jpg
ImgBtnUG_UGN=BtnUG_UGN.jpg

ImgBGMain=BGMain.jpg
ImgFrameBG=FrameBG.jpg
ImgBGProgress=BGProgress.JPG
ImgBtnN=SBtnN.bmp
ImgBtnH=SBtnH.bmp
ImgBtnD=SBtnD.bmp
ImgTutorial=ImgTutorial.jpg
ImgTutorial2=ImgTutorial2.jpg