HP LaserJet Pro 300 color M351
HP LaserJet Pro 400 color M451
Windows Software Install Notes
The CD that ships with your product includes software for the following operating systems:
|
Windows® XP 32-bit (Service Pack 2 and higher) |
|
Windows Vista 32-bit and 64-bit |
|
Windows 7 32-bit and 64-bit |
|
Windows Server 2003 32-bit (Service Pack 3) |
|
Windows Server 2008 32-bit and 64-bit |
The following operating systems support the recommended software components:
|
Windows® XP 32-bit (Service Pack 2 and higher) |
|
Windows Vista 32-bit and 64-bit |
|
Windows 7 32-bit and 64-bit |
The recommended software includes the following components:
|
HP LaserJet Help and Learn Center |
|
HP LaserJet PCL6 print driver |
|
HP Device Toolbox |
|
HP Web Registration |
|
HP Update |
|
Reconfigure your HP device |
|
HP LaserJet customer participation |
NOTE: The minimum software may be installed instead of the recommended by choosing “Click here for more install options” on the Software to Install screen.
The following operating systems support only the minimum software components:
|
Windows Server 2003 32-bit (Service Pack 3) |
|
Windows Server 2008 32-bit and 64-bit |
The minimum software includes the following components:
|
HP LaserJet PCL6 print driver |
For information and printer drivers for Linux, go to the following Web site:
www.hp.com/go/linux
For information and printer drivers for UNIX®, go to the following Web site:
www.hp.com/pond/modelscripts/index2.html
OVERVIEW OF THE SOFTWARE COMPONENTS
|
HP PCL6 print driver for the supported operating systems listed above |
INSTALLING SOFTWARE BY USING HP SMART INSTALL
|
Connect a USB cable to the product. Turn on the product, and connect the USB cable to the computer. |
|
Follow the onscreen instructions. Remove the USB cable, only if instructed. |
The HP Smart Install program might take a few minutes to start.
INSTALLING SOFTWARE FROM THE PRODUCT CD
Note: Administrator privileges are required to install the software.
|
Quit all programs. |
|
Insert the CD-ROM. |
|
If the HP software installer program has not started after 30 seconds, complete the following steps. |
|
|
Click Start and then select Computer or My Computer from the right hand Start menu. |
|
|
Browse to the root directory on the CD-ROM drive. |
|
|
Double click the AUTORUN.EXE file. |
|
Click the Install button to start the software installation. |
|
Follow the onscreen instructions to complete the software installation. |
|
From the Start menu, select All Programs, and then click HP. If you have more than one HP product choose the specific product and then click Uninstall from the program group. |
|
Follow the onscreen instructions to complete the software uninstall. |
You also can browse to the following URL(s) for online technical support:
HP LaserJet Pro 300 color M351 - www.hp.com/support/LJColorM351
HP LaserJet Pro 400 color M451 - www.hp.com/support/LJColorM451
Microsoft®, Windows®, and Windows® XP are U.S. registered trademarks of Microsoft Corp.
UNIX® is a registered trademark of the Open Group.
See the product user guide for complete warranty and support information.
© 2011 Copyright Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.